Product Description

Based on BCM advanced metal foil strain gauge technology, 5719/5799 load pins are made of double-ended shear-beam working principle. 5719/5799 load pin is mostly used as a shaft of sensor function when the middle part of the shaft intends to have a shearing shift corresponding to the rest on the two sides of the shaft, which can be considered as two stationary parts.
5719/5799 load pins can be used to measure the forces ranging from 10 kN to 1000 kN with an accuracy up to 0.2%fs (fs = full scale). Amplified and conditioned output signal such as 4~20mA or 0.5~5V or 0.5~10V are available on request. These load pins can be sealed to high protection grade up to IP 68 so as to be operated under harsh industrial environment.
5719/5799 load pins are often used as traction-force sensors (draft sensors) to be installed in crane system, hopper system, process system, and onboard vehicle system where the single-ended shaft of senor is necessary to measure the concerned force.

Additional Information